Skip to the article
Kitchen, Bath & Interiors Journal

Independent notes on kitchens, bathrooms, colour and the craft of a New Zealand home.

Planning a reno

Healthy homes standards and interior design for rentals

How NZ's healthy homes standards on heating, insulation, ventilation, moisture and draughts shape a rental fit-out, and the interior choices that help.

Designing a rental interior is a different exercise from designing your own home. Finishes need to survive a steady turnover of tenants. Every room needs to look good in a listing photo. Since 1 July 2025, every private rental in New Zealand has also had to meet the healthy homes standards. Those standards are about warmth and dryness, not aesthetics, but many of the decisions overlap. A well-planned refresh can make a rental easier to keep compliant, cheaper to maintain and more pleasant to live in.

The five standards in brief

The healthy homes standards sit under the Residential Tenancies Act and cover five areas. Tenancy Services publishes the detail. In outline:

Heating. The main living room needs one or more fixed heaters that can directly heat it, each at least 1.5 kW. Together they must meet a minimum heating capacity worked out for that room. Open fires and unflued combustion heaters, such as portable LPG cabinet heaters, don't count. Plain electric heaters are not allowed where the required capacity is over 2.4 kW, apart from limited top-ups of older qualifying heating. Heat pumps, wood burners, pellet burners and flued gas heaters are the usual compliant options.

Insulation. Ceiling and underfloor insulation is compulsory where it's reasonably practicable to install. It must meet minimum R-values or, for older ceiling insulation, a minimum thickness. In September 2025 the rules were adjusted to give some newer homes with limited ceiling space an alternative route to compliance.

Ventilation. Living rooms, dining rooms, kitchens and bedrooms need openable windows, doors or skylights. Together these must make up at least 5% of each room's floor area. Any room with a shower or bath, and any room with a cooktop, needs an extractor fan vented to the outside. The ventilation standard sets minimums for fans installed after 1 July 2019. A bathroom fan must be at least 120 mm in diameter or extract at least 25 litres per second. A kitchen fan or rangehood must be at least 150 mm or extract at least 50 litres per second.

Moisture ingress and drainage. The property needs efficient drainage for stormwater, surface water and groundwater, including gutters and downpipes. If there's an enclosed subfloor, a ground moisture barrier is required where one can reasonably be installed.

Draught stopping. Unreasonable gaps and holes in walls, ceilings, windows, skylights, floors and doors that cause noticeable draughts must be blocked. Open fireplaces must be closed off unless the tenant asks in writing to use them and the landlord agrees.

Where the deadlines stand

The compliance timeline has now fully passed. Private landlords had to bring a property up to standard within 90 days of a new or renewed tenancy from 1 July 2021. For tenancies starting from late August 2022, that window was 120 days. All private rentals have had to comply since 1 July 2025. Boarding houses had to comply by 1 July 2021, and Kāinga Ora and registered community housing providers by 1 July 2024. Every new or renewed tenancy agreement must also include a healthy homes compliance statement.

Compliance is the floor, not the finish. A good rental interior makes staying compliant the easy default.

Meeting the standards in practice

Meeting the healthy homes standards in practice is less about one big upgrade than about keeping records and keeping things working. Start with a room-by-room check: measure the living room and work out the required heating capacity, and look in the ceiling and under the floor to confirm insulation is there and undamaged. Confirm that each fan actually extracts to the outside, and test the windows open and latch. Keep photos, product details, installer paperwork and your heating calculation together, because you'll need them for the compliance statement and if a question ever goes to the Tenancy Tribunal. Then build the checks into your routine inspections. A fan that has stopped working, a moisture barrier disturbed by a plumber or a gap where weatherstripping has worn away can quietly take a compliant home out of compliance.

How interior choices fit in

The standards are mostly about the building fabric and services, but interior decisions can make them easier or harder to live with.

Extractor fans that actually get used

A compliant fan doesn't help if the tenant never turns it on. Wire bathroom fans to the light switch with a run-on timer, or fit a humidity-sensing fan. Choose a quiet model, because noisy fans get switched off. In the kitchen, a ducted rangehood with a clear switch and washable filters gets more use than a recirculating unit, which doesn't satisfy the vent-to-outside requirement anyway.

Curtains and window coverings

Lined, well-fitted curtains aren't a healthy homes requirement. Even so, they make a big difference to how warm a room feels and how hard the heater works. Thermal-backed curtains that run from above the frame to below the sill, ideally with a pelmet or close-fitting track, cut heat loss through single glazing noticeably. Choose washable fabrics: in damp rooms, curtains can collect mould at the hem if they're never cleaned.

Durable, cleanable finishes

Moisture problems show up first on finishes. A few choices help:

  • Bathroom and kitchen paint with a mould inhibitor on ceilings and walls near wet areas.
  • Sheet vinyl or tiles rather than carpet anywhere near water.
  • Moisture-resistant cabinetry with sealed edges, particularly under sinks.
  • Hard-wearing flooring in living areas, with rugs the tenant can bring and take away.
  • Mid-tone colours on high-traffic walls, which hide marks between repaints better than bright white.

Heating that suits the room

A heat pump is often the simplest way to meet the heating standard, and placement matters for comfort. Mount it where it can blow along the length of the room, not straight onto a sofa or dining table. Keep furniture and curtains clear of it. Make sure the tenant gets the remote and a one-page guide on using it efficiently.

Draught stopping as part of the refit

During a refresh, it's easy to add self-adhesive or fitted weatherstripping to doors and windows. It's also easy to fill gaps around pipes under sinks and to replace damaged skirting boards that let air in from the subfloor. These are small jobs, but they are exactly the sort of gaps the draught-stopping standard targets.

Think about the tenant's side too

Some moisture problems come from how a home is used. Many tenants dry clothes inside, keep windows closed through winter, or don't know the fan is there. Leave clear, friendly information: where the fan switches are, how the dryer vents, and why opening windows for a few minutes each morning helps. It costs nothing and protects both the home and the people living in it.

The bottom line

The healthy homes standards set a legal minimum for warmth and dryness. Good interior choices, like fans that run automatically, proper curtains, durable finishes and sensibly placed heating, turn that minimum into a home tenants want to stay in. That usually means longer tenancies and fewer repairs.